AudGen

SCPI Commands :

[SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ1
[SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ2
[SOURce<HW>]:BB:RADio:FM:AUDGen:LEV1
[SOURce<HW>]:BB:RADio:FM:AUDGen:LEV2

class AudGenCls

AudGen commands group definition. 4 total commands, 0 Subgroups, 4 group commands

get_frq_1() → int

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ1
value: int = driver.source.bb.radio.fm.audGen.get_frq_1()

Sets the frequency.

return:

freq_left: No help available

get_frq_2() → int

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ2
value: int = driver.source.bb.radio.fm.audGen.get_frq_2()

Sets the frequency.

return:

freq_right: integer Range: 30 to 15000, Unit: Hz

get_lev_1() → float

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:LEV1
value: float = driver.source.bb.radio.fm.audGen.get_lev_1()

Sets the level.

return:

level_left: No help available

get_lev_2() → float

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:LEV2
value: float = driver.source.bb.radio.fm.audGen.get_lev_2()

Sets the level.

return:

level_right: float Range: -60 to 12, Unit: dBu

set_frq_1(freq_left: int) → None

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ1
driver.source.bb.radio.fm.audGen.set_frq_1(freq_left = 1)

Sets the frequency.

param freq_left:

integer Range: 30 to 15000, Unit: Hz

set_frq_2(freq_right: int) → None

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:FRQ2
driver.source.bb.radio.fm.audGen.set_frq_2(freq_right = 1)

Sets the frequency.

param freq_right:

integer Range: 30 to 15000, Unit: Hz

set_lev_1(level_left: float) → None

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:LEV1
driver.source.bb.radio.fm.audGen.set_lev_1(level_left = 1.0)

Sets the level.

param level_left:

float Range: -60 to 12, Unit: dBu

set_lev_2(level_right: float) → None

# SCPI: [SOURce<HW>]:BB:RADio:FM:AUDGen:LEV2
driver.source.bb.radio.fm.audGen.set_lev_2(level_right = 1.0)

Sets the level.

param level_right:

float Range: -60 to 12, Unit: dBu