Bbin
SCPI Commands :
[SOURce<HW>]:BBIN:CDEVice
[SOURce<HW>]:BBIN:CFACtor
[SOURce<HW>]:BBIN:FOFFset
[SOURce<HW>]:BBIN:GIMBalance
[SOURce<HW>]:BBIN:MODE
[SOURce<HW>]:BBIN:MPERiod
[SOURce<HW>]:BBIN:ODELay
[SOURce<HW>]:BBIN:PGAin
[SOURce<HW>]:BBIN:POFFset
[SOURce<HW>]:BBIN:ROUTe
[SOURce<HW>]:BBIN:SKEW
[SOURce<HW>]:BBIN:STATe
- class BbinCls[source]
Bbin commands group definition. 35 total commands, 8 Subgroups, 12 group commands
- get_cdevice() str [source]
# SCPI: [SOURce<HW>]:BBIN:CDEVice value: str = driver.source.bbin.get_cdevice()
Indicates the ID of an externally connected Rohde & Schwarz Instrument or Rohde & Schwarz device.
- return:
cdevice: string ‘None’ - no device is connected.
- get_cfactor() float [source]
# SCPI: [SOURce<HW>]:BBIN:CFACtor value: float = driver.source.bbin.get_cfactor()
No command help available
- return:
cfactor: No help available
- get_foffset() float [source]
# SCPI: [SOURce<HW>]:BBIN:FOFFset value: float = driver.source.bbin.get_foffset()
Sets a frequency offset for the internal/external baseband signal. The offset affects the generated baseband signal.
- return:
foffset: float Range: depends on the installed options , Unit: Hz
- get_gimbalance() float [source]
# SCPI: [SOURce<HW>]:BBIN:GIMBalance value: float = driver.source.bbin.get_gimbalance()
No command help available
- return:
gimbalance: No help available
- get_mode() AnalogDigital [source]
# SCPI: [SOURce<HW>]:BBIN:MODE value: enums.AnalogDigital = driver.source.bbin.get_mode()
Defines that a digital external signal is applied.
- return:
mode: DIGital
- get_mperiod() int [source]
# SCPI: [SOURce<HW>]:BBIN:MPERiod value: int = driver.source.bbin.get_mperiod()
Sets the recording duration for measuring the baseband input signal by executed [:SOURce<hw>]:BBIN:ALEVel:EXECute.
- return:
mperiod: integer Range: 1 to 32, Unit: s
- get_odelay() float [source]
# SCPI: [SOURce<HW>]:BBIN:ODELay value: float = driver.source.bbin.get_odelay()
No command help available
- return:
delay: No help available
- get_pgain() float [source]
# SCPI: [SOURce<HW>]:BBIN:PGAin value: float = driver.source.bbin.get_pgain()
No command help available
- return:
pgain: No help available
- get_poffset() float [source]
# SCPI: [SOURce<HW>]:BBIN:POFFset value: float = driver.source.bbin.get_poffset()
Sets the relative phase offset for the external baseband signal.
- return:
poffset: float Range: -999.99 to 999.99, Unit: DEG
- get_route() PathUniCodBbinA [source]
# SCPI: [SOURce<HW>]:BBIN:ROUTe value: enums.PathUniCodBbinA = driver.source.bbin.get_route()
Selects the signal route for the internal/external baseband signal.
- return:
route: A
- get_skew() float [source]
# SCPI: [SOURce<HW>]:BBIN:SKEW value: float = driver.source.bbin.get_skew()
No command help available
- return:
skew: No help available
- get_state() bool [source]
# SCPI: [SOURce<HW>]:BBIN:STATe value: bool = driver.source.bbin.get_state()
Enables feeding of an external digital signal into the signal path.
- return:
state: 1| ON| 0| OFF
- set_cfactor(cfactor: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:CFACtor driver.source.bbin.set_cfactor(cfactor = 1.0)
No command help available
- param cfactor:
No help available
- set_foffset(foffset: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:FOFFset driver.source.bbin.set_foffset(foffset = 1.0)
Sets a frequency offset for the internal/external baseband signal. The offset affects the generated baseband signal.
- param foffset:
float Range: depends on the installed options , Unit: Hz
- set_gimbalance(gimbalance: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:GIMBalance driver.source.bbin.set_gimbalance(gimbalance = 1.0)
No command help available
- param gimbalance:
No help available
- set_mode(mode: AnalogDigital) None [source]
# SCPI: [SOURce<HW>]:BBIN:MODE driver.source.bbin.set_mode(mode = enums.AnalogDigital.ANALog)
Defines that a digital external signal is applied.
- param mode:
DIGital
- set_mperiod(mperiod: int) None [source]
# SCPI: [SOURce<HW>]:BBIN:MPERiod driver.source.bbin.set_mperiod(mperiod = 1)
Sets the recording duration for measuring the baseband input signal by executed [:SOURce<hw>]:BBIN:ALEVel:EXECute.
- param mperiod:
integer Range: 1 to 32, Unit: s
- set_odelay(delay: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:ODELay driver.source.bbin.set_odelay(delay = 1.0)
No command help available
- param delay:
No help available
- set_pgain(pgain: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:PGAin driver.source.bbin.set_pgain(pgain = 1.0)
No command help available
- param pgain:
No help available
- set_poffset(poffset: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:POFFset driver.source.bbin.set_poffset(poffset = 1.0)
Sets the relative phase offset for the external baseband signal.
- param poffset:
float Range: -999.99 to 999.99, Unit: DEG
- set_route(route: PathUniCodBbinA) None [source]
# SCPI: [SOURce<HW>]:BBIN:ROUTe driver.source.bbin.set_route(route = enums.PathUniCodBbinA.A)
Selects the signal route for the internal/external baseband signal.
- param route:
A
- set_skew(skew: float) None [source]
# SCPI: [SOURce<HW>]:BBIN:SKEW driver.source.bbin.set_skew(skew = 1.0)
No command help available
- param skew:
No help available
- set_state(state: bool) None [source]
# SCPI: [SOURce<HW>]:BBIN:STATe driver.source.bbin.set_state(state = False)
Enables feeding of an external digital signal into the signal path.
- param state:
1| ON| 0| OFF
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.source.bbin.clone()
Subgroups