InputPy
SCPI Commands :
[SOURce<HW>]:BB:ISDBt:INPut:FORMat
[SOURce<HW>]:BB:ISDBt:INPut:TSCHannel
[SOURce<HW>]:BB:ISDBt:[INPut]:DATarate
[SOURce<HW>]:BB:ISDBt:INPut
- class InputPyCls[source]
InputPy commands group definition. 4 total commands, 0 Subgroups, 4 group commands
- get_data_rate() int [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:[INPut]:DATarate value: int = driver.source.bb.isdbt.inputPy.get_data_rate() INTRO_CMD_HELP: Queries the measured value of the data rate of one of the following: - External transport stream including null packets input at 'User 1' connector - External transport stream including null packets input at 'IP Data/LAN' connector (TSoverIP)
The value equals the sum of useful data rate rmeas and the rate of null packets r0: rmeas = rmeas + r0
- return:
meas_drate: integer Range: 0 to 9999
- get_format_py() CodingInputFormat [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut:FORMat value: enums.CodingInputFormat = driver.source.bb.isdbt.inputPy.get_format_py()
Sets the format of the input signal.
- return:
input_format: ASI| SMPTE
- get_ts_channel() NumberA [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut:TSCHannel value: enums.NumberA = driver.source.bb.isdbt.inputPy.get_ts_channel()
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS channels as input at the ‘IP Data’ interface. To configure a particular channel, see ‘IP channel x settings’.
- return:
ts_channel: 1| 2| 3| 4
- get_value() CodingInputSignalInputB [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut value: enums.CodingInputSignalInputB = driver.source.bb.isdbt.inputPy.get_value()
Sets the external input interface.
- return:
input_py: TS| ASIFront| ASIRear| SPIFront| SPIRear| IP
- set_format_py(input_format: CodingInputFormat) None [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut:FORMat driver.source.bb.isdbt.inputPy.set_format_py(input_format = enums.CodingInputFormat.ASI)
Sets the format of the input signal.
- param input_format:
ASI| SMPTE
- set_ts_channel(ts_channel: NumberA) None [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut:TSCHannel driver.source.bb.isdbt.inputPy.set_ts_channel(ts_channel = enums.NumberA._1)
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS channels as input at the ‘IP Data’ interface. To configure a particular channel, see ‘IP channel x settings’.
- param ts_channel:
1| 2| 3| 4
- set_value(input_py: CodingInputSignalInputB) None [source]
# SCPI: [SOURce<HW>]:BB:ISDBt:INPut driver.source.bb.isdbt.inputPy.set_value(input_py = enums.CodingInputSignalInputB.ASIFront)
Sets the external input interface.
- param input_py:
TS| ASIFront| ASIRear| SPIFront| SPIRear| IP